MOT Status
ValidMileage
79,493 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Exhaust silencer slightly loose (8.1.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Emissions unable to be completed (8.2.2.2 (e))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Offside Front Direction indicator not working Indicator (4.4.1 (a) (ii))
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Brake performance unable to be tested brake pipe leaking under pressure (1.2.1 (g))
Rear Emissions unable to be completed section missing (8.2.2.2 (e))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Brake pipe leaking on a hydraulic braking system axle brake pipe (1.1.11 (b) (ii)) DANGEROUS
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor to chassis (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
all coil spring/s have corrosion
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover missing (5.3.4 (b) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
brakes imbalanced may need attention
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Rear registration plate missing (6.3.1a)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit 3mm (4.1.E.1)
Nearside Rear Nail in tyre
Nearside Rear Tyre worn close to the legal limit 2mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit 2mm (4.1.E.1)
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
How Reliable is the Audi A3?
Based on 7,415,025 MOT tests across 593,922 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KU60 XBO is a 2010 Audi A3 in White with a 1,968cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2010 Audi A3 models, the average MOT pass rate is 78.1% with a typical mileage of 80,809 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi A3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 173,142 recorded failures. If you're considering buying KU60 XBO, it's worth having these areas checked by a mechanic before committing.
The Audi A3 typically stays on UK roads for around 29 years. At 16 years old, this Audi A3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KU60 XBO?
You can check the full history of KU60 XBO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KU60 XBO registered?
KU60 XBO is a 2010 Audi A3, first registered on 1 September 2010.
Is KU60 XBO safe to buy?
The MOT history for KU60 XBO shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KU60 XBO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KU60 XBO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.