2012 Ford Ranger

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Leaf spring fractured (5.3.1 (b) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member (6.1.1 (c) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear tub has corrosion lower nearside wheel arch

Offside Rear Floor excessively deteriorated goods carrying compartment underside (6.2.4 (a) (i))

Offside Rear Position lamp lens seriously defective broken lens (4.2.1 (b))

Rear fog lamp light intensity significantly reduced (4.5.4 (a))

Tailgate corroded and likely to cause injury (6.2.1 (a) (i))

Windscreen wiper does not clear the windscreen effectively goods carrying compartment (3.4 (b) (ii))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced rear load bed mountings and cross members (6.1.1 (c) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake hose slightly damaged (1.1.12 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear sections of chassis (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Brake hose excessively twisted and insecure (1.1.12 (b) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced rear load bed mountings and cross members (6.1.1 (c) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake hose slightly damaged (1.1.12 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear sections of chassis (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Registration plate lamp not working (1.1.C.1d)