MOT Status
ExpiredMileage
103,222 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Fuel Pipe/s corroded ()
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis/boot floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive floor pan but not quite within 30cm (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Fuel Pipe/s corroded ()
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis/boot floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area damaged but not considered excessive floor pan but not quite within 30cm (5.3.6 (a) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting (inside of chassis rail) (5.3.6 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting/boot floor (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar mounting/ boot floor (5.3.6 (a) (i))
Offside Rear wing/sill has a repair using filler. seat belt mounting lower
Rear Prop shaft bearing has slight play (6.1.7 (b) (i))
Front Sub-frame pin or bush worn but not resulting in excessive movement subframe both rear bushes (5.3.4 (a) (i))
Headlamp reflector slightly defective Both front (4.1.1 (b) (i))
Offside Rear floor pan corroded but not within 30cm of prescribed area no rear seat belts fitted
Oil leak, but not excessive (8.4.1 (a) (i))
Rear brake application slightly uneven
Nearside Headlamp aim too high (4.1.2 (a))
Offside Headlamp aim too high and too far to the right. (4.1.2 (a))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear floor pan corroded but not within 30cm of prescribed area as no rear seat belts fitted
Oil leak, but not excessive (8.4.1 (a) (i))
Rear brake application slightly uneven
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Emissions not tested Not holding idle and excessive exhaust blow (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases Down pipe joint (6.1.2 (a))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill marked yellow (7.1.1 (a) (i))
Nearside Rear Seat belt buckle not functioning as intended (7.1.2 (d))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Seat belt retracting mechanism defective (7.1.2 (e))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch within strut prescribed area marked yellow (5.3.6 (a) (i))
Offside Rear Seat belt buckle not functioning as intended (7.1.2 (d))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill marked yellow (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Underside/body marked yellow (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Steering linkage insecure to the extent there is excessive movement at the mountings Steering idle arm marked yellow (2.1.3 (a) (ii)) DANGEROUS
Corrosion underside
Harsh corrosion nearside front sill
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive Rear differential (8.4.1 (a) (i))
Wipers not tested
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Front Exhaust has a major leak of exhaust gases extensive holes everywhere in exhaust (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Seat belt damaged (7.1.2 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill (5.3.6 (a) (i))
Offside Rear Wheel bearing rough when rotated maybe brakes (5.1.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Seat belt slightly damaged (7.1.2 (b) (i))
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Lower Suspension arm corroded and seriously weakened (2.4.G.1)
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Direction indicators not working (1.4.A.2c)
Hazard warning switch missing (1.4.B.1d)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Hazard warning switch faulty (1.4.B.1d)
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Seat belt retracting mechanism defective (5.2.5b)
Nearside Steering component mounting prescribed area is excessively corroded chassis (2.2.C.1h)
Offside Front Steering component mounting prescribed area is excessively corroded floor (2.2.C.1h)
Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Seat belt retracting mechanism defective (5.2.5b)
Nearside Front Seat belt stitching badly frayed (5.2.2b)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Seat belt stitching badly frayed (5.2.2b)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Oil leak
Rear Brake pad(s) wearing thin (3.5.1g)
off side headlamp on lower limit
Battery insecure (1.9.1)
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Direction indicator not working (1.4.A.2c)
Offside rear brake binding (3.7.B.1)
Offside rear brake recording little or no effort (3.7.B.5a)
Nearside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Oil leak
Rear Brake pad(s) wearing thin (3.5.1g)
off side headlamp on lower limit
Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front front brake binding (3.7.B.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front front brake binding (3.7.B.1)
Offside Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
both seat belts frayed but not to excess
nearside rear brake binding slightly
Nearside Front Seat belt insecurely fixed to the seat (5.2.1a)
Nearside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside front brake binding (3.7.B.1)
Nearside rear brake binding (3.7.B.1)
Offside Front Headlamp aim too low (1.8)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)
Offside Rear fog lamp not working (1.3.2b)
Offside front brake binding (3.7.B.1)
Offside rear brake binding (3.7.B.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both front lower suspension arms have corrosion
exhaust deteriorating
exhaust mounts perished
nearside front outer sill poor condition
offside front anti-roll bar link bushes worn
offside front seat catch not working
offside rear inner sill poor condition
windscreen cracked not in view
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Nearside Front Seat belt retracting mechanism defective (5.2.5b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper not operating automatically when switched on (8.2.1b)
Offside Windscreen wiper not operating automatically when switched on (8.2.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Brake pipe excessively corroded (3.6.B.2c)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear rear brake application uneven (3.7.B.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
several exhaust mountings perished
Nearside Front Seat belt insecurely fixed to the seat (5.2.1a)
Nearside Front Seat belt retracting mechanism defective (5.2.5b)
Nearside Outer Body has slight corrosion (6.1.B.2)
Offside Outer Body has slight corrosion (6.1.B.2)
How Reliable is the Mercedes-benz Sl?
Based on 528,820 MOT tests across 35,553 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KUI 1768 is a 1981 Mercedes-benz Sl in Blue with a 2,746cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 44.4%.
Across all 1981 Mercedes-benz Sl models, the average MOT pass rate is 72.8% with a typical mileage of 94,168 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Sl fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 8,801 recorded failures. If you're considering buying KUI 1768, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Sl typically stays on UK roads for around 43 years. At 45 years old, this Mercedes-benz Sl is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KUI 1768?
You can check the full history of KUI 1768 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KUI 1768 registered?
KUI 1768 is a 1981 Mercedes-benz Sl, first registered on 1 August 1981.
Is KUI 1768 safe to buy?
The MOT history for KUI 1768 shows 27 tests with a 44.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KUI 1768 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KUI 1768. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.