MOT Status
ExpiredMileage
289,614 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Outer Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Front seat slightly ripped
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive x member (5.3.6 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive x member (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive middle inner sill (5.3.6 (a) (i))
Nearside Front Body component corroded and likely to cause injury wing (6.2.1 (a) (i))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush excessively worn drop link (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch at front near bumper (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing under bonnet (5.3.6 (a) (i))
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive x member (5.3.6 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive x member (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive middle inner sill (5.3.6 (a) (i))
rear cross member corroded but not in a prescribed area
Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension component mounting prescribed area is excessively corroded outrigger at inner sill (2.4.A.3)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Suspension component mounting prescribed area is excessively corroded outrigger at inner sill (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Rear Stop lamp not working (1.2.1b)
rear cross member corroded but not in a prescribed area
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Offside Front front brake fluctuating, but not excessively (3.7.B.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear rear parking brake recording little or no effort low (3.7.B.6a)
Nearside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Offside Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Centre Rear Brake pipe inadequately clipped (3.6.B.1)
Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Headlamp aim too high (1.8)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear coil spring fractured (2.4.C.1a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
all tyres wearing thin on inner and outer edges
front offside and nearside inner cv boots perished
handbrake may need attention shortly
rear axle brake pipes corroded
Rear Brake pipe slightly corroded (3.6.B.2c)
offside and nearside inner cv boots split
rear handbrake only just met requirements
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KV03 GKY is a 2003 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2003 Mercedes-benz Vito models, the average MOT pass rate is 66.0% with a typical mileage of 105,209 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying KV03 GKY, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 23 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KV03 GKY?
You can check the full history of KV03 GKY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KV03 GKY registered?
KV03 GKY is a 2003 Mercedes-benz Vito, first registered on 31 March 2003.
Is KV03 GKY safe to buy?
The MOT history for KV03 GKY shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KV03 GKY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KV03 GKY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.