2008 Mercedes-benz C

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material centre (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Brake pipe corroded, covered in grease or other material all visible brake pipes covered in grease (1.1.11 (c))

Nearside Front Inner Position lamp with a multiple light source up to 1/2 not functioning N/S/F inner sidelight bulb not working,multible light source (4.2.1 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Tyre worn close to legal limit/worn on edge O/S/R and N/S/R tyre treads low (5.2.3 (e))

Registration plate deteriorated but not likely to be misread FRONT and REAR number plates deteriorating (0.1 (b))

Brake pedal wearing smooth pedal rubber worn (1.1.2 (c))

Brake pipe corroded, covered in grease or other material front & rear brake pipe unions covered in grease (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge nearside & offside outer edges wearing (5.2.3 (e))

Registration plate deteriorated but not likely to be misread front & rear (0.1 (b))

engine & underbody covers fitted

engine service light is on

Brake pedal wearing smooth pedal rubber worn (1.1.2 (c))

Brake pipe corroded, covered in grease or other material front & rear brake pipe unions covered in grease (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge nearside & offside outer edges wearing (5.2.3 (e))

Nearside Rear Position lamp showing white light to the rear tail light lens incomplete, put red tape over the hole (4.2.3 (a) (ii))

Registration plate deteriorated but not likely to be misread front & rear (0.1 (b))

engine & underbody covers fitted

engine service light is on

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

wear edges both front tyres 205/55/16

Nearside Rear Service brake excessively binding (1.2.1 (f))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

wear edges both front tyres 205/55/16

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt link rod (5.3.4 (b) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 205/55/16 (5.2.3 (d) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt link rod (5.3.4 (b) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing and wear 205/55/16 (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt link rod (2.4.G.2)

both rear tyres slight perishing and wear 205/55/16

n/s rear tyre sidewall damage slight cord exposed 205/55/16

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both rear tyres 3mm 205/55/16

sidewall damage n/s front tyre 205/55/16

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

side wall damage nearside front tyre (205/55/16)

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

n/s front tyre pressure low

205/55 r16

n/s/f tyre worn close to legal limit 1.6mm.worn low on edges

o/s/f tyre worn close to legal limit 1.6mm. worn low on edges

Under-trays fitted obscuring some underside components

wear edges o/s front tyre 205/55/16

n/s/f tyre tread getting low on outer edge

n/s/r tyre tread getting low 3.0mm