2011 Mazda 3

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Suspension arm ball joint has slight play both (5.3.4 (a) (i))

Nearside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Exhaust front to rear corroding and has minor leaks of gasses

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

N/s and centre rear seatbelts non accessible for testing

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Exhaust front to rear corroding and has minor leaks of gasses

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

N/s and centre rear seatbelts non accessible for testing

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

n/s rear tyre has cracks around the tread

N/s rear tyre has cracks around the tread rubber

Power steering fluid resovoir approx 50% low

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)