2001 Chrysler Pt Cruiser

Coolant leak ()

EML on

Offside engine mount worn

Oil leak ()

Play in steering rack inner joint(s) ()

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe slightly corroded both sides (3.6.B.2c)

both outer sills damaged

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Coolant leak ()

EML on

Offside engine mount worn

Oil leak ()

Play in steering rack inner joint(s) ()

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe slightly corroded both sides (3.6.B.2c)

both outer sills damaged

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner track control arm inner joint worn

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement d-bush (2.4.G.2)

Nearside wiper blade deteriorated

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front engine mount deteriorated

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement d-bush (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f) DANGEROUS

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

front and rear brake discs cororreded

Nearside Front front brake binding (3.7.B.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front front brake binding (3.7.B.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

front and rear brake discs cororreded

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)