2003 Seat Alhambra

Exhaust mounting defective clamp missing from rear section joint (6.1.2 (a))

Nearside Rear Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust mounting defective clamp missing from rear section joint (6.1.2 (a))

Nearside Rear Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust mounting defective clamp missing from rear section joint (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Subframe mounting prescribed area is corroded but not considered excessive o/side mounting point of rear sub frame (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mounting point on o/side corroded within 30cm (5.3.6 (a) (i))

Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Exhaust mounting defective clamp missing from rear section joint (6.1.2 (a))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mounting deteriorated (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm,devoid of tread on outer edge and damaged (5.2.3 (e))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mounting deteriorated (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3mm,devoid of tread on inner edge and damaged (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Subframe mounting prescribed area is corroded but not considered excessive o/side mounting point (5.3.6 (a) (i))

Exhaust mounting defective clamp missing from rear section joint (6.1.2 (a))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mounting (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing slight damage to outer wall (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mounting (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive rear mounting point (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3mm,devoid on inner edge of tread (5.2.3 (e))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Exhaust mounting defective clamp missing from rear section joint (6.1.2 (a))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mounting (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing slight damage to outer wall (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mounting (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive rear mounting point (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3mm,devoid on inner edge of tread (5.2.3 (e))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing slight damage (5.2.3 (d) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Tyre worn close to legal limit/worn on edge devoid of tread on inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive o/side rear of front sub frame (5.3.6 (a) (i))

Brake pipe excessively corroded between n/side rear flexible hoses (1.1.11 (c))

Brake pipe excessively corroded between o/side rear flexible hoses (1.1.11 (c))

Central Rear Seat belt missing (7.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Nail in tyre ()

Nearside Rear Tyre slightly damaged/cracking or perishing slight damage (5.2.3 (d) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Tyre worn close to legal limit/worn on edge devoid of tread on inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive o/side rear of front sub frame (5.3.6 (a) (i))

Brake pipe slightly corroded between n/side rear flexible hose and caliper. (3.6.B.2c)

Brake pipe slightly corroded between o/side rear flexible hose and caliper (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Tyre worn close to the legal limit inside devoid of tread (4.1.E.1)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Brake pipe slightly corroded between n/side rear flexible hose and caliper. (3.6.B.2c)

Brake pipe slightly corroded between o/side rear flexible hose and caliper (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Nail in tyre ()

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Tyre worn close to the legal limit inside devoid of tread (4.1.E.1)

EML light on.

Nearside Front Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

EML light on.

Nearside Front Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Upper Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Upper Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Nearside Front Upper Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Headlamp aim too low (1.8)

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Upper Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)