2008 Toyota Aygo

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides.. (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Service brake fluctuating, but not excessively (1.2.1 (e))

rear axle corroded..

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Rear Brakes imbalanced across an axle by more than 50% Axle 2 (1.2.1 (b) (ii)) DANGEROUS

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides.. (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Service brake fluctuating, but not excessively (1.2.1 (e))

rear axle corroded..

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both sides. (5.3.4 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both sides. (5.3.4 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Emissions not tested due to giving out blue smoke (8.2.1.2 (d))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Anti-roll bar linkage ball joint dust cover severely deteriorated o/s and n/s (5.3.4 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Front Anti-roll bar linkage ball joint dust cover severely deteriorated o/s and n/s (5.3.4 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Headlamp aim too high and too far to the right. (4.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front wiper starting to split