2002 Jaguar X-type

Anti-roll bar linkage ball joint dust cover severely deteriorated both front (5.3.4 (b) (i))

Suspension arm corroded but not seriously weakened both rear lower (5.3.3 (b) (i))

inner & outer sills & floors corroded

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

underbody corrosion

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

underbody corrosion

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Headlamp aim too high (1.8)

Offside Front Outer tyre edge worn

e m light on

Front Windscreen wiper does not clear the windscreen effectively x2 (8.2.2)

Nearside Suspension component mounting prescribed area is excessively corroded outer sill in places need to take the cover off (2.4.A.3)

Offside Front coil spring broken (2.4.C.1a)

Offside Outer Suspension component mounting prescribed area is excessively corroded sill need to take the covers off (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Stop lamp not working (1.2.1b)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Upper Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside front brakes release unevenly (3.7.B.4)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Inner Front Brake pad(s) wearing thin (3.5.1g)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Brake pipe excessively corroded (3.6.B.2c)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brake pipe slightly corroded (3.6.B.2c)

Nail in offside rear tyre

Oil leak

Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Registration plate lamp not working (1.1.5c)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Rear Registration plate lamp not working (1.1.5c)