2007 Peugeot 1007

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

exhaust heat shield loose

few areas of corrosion

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Horn not working (7.7 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

exhaust heat shield loose

few areas of corrosion

Offside Rear Service brake binding but not excessively (1.2.1 (f))

few areas of corrosion

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control switch not functioning correctly (7.12 (d))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

few areas of corrosion

exhaust heatshield insecure

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

exhaust heatshield insecure

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Driver's view to the sides outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

surface rust to rear floors, inner sills and suspension mouniting points.

Nearside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor/chassis rail surface corrosion (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor/chassis rail surface corrosion (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Passenger seat(s) missing at time of test

Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has little reserve travel (3.1.6b)