2013 Aprilia RS4 125

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Registration plate does not conform to the specified requirements likely to be misread because of cable tie (0.1 (d))

Bottom shock absorber bush has slight play

Direction indicator lens defective which has no effect on emitted light R/H - F & R lens broken, but fitted with orange bulbs (4.4.1 (b) (i))

Exhaust slightly noisey

Front Brake lever has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

L/H lower side fairing secure - but not fitted correctly

Not fitted with chain guard

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear reflector on motorcycle obscured (1.4.2b)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) excessively worn (3.2.A1l)

Offside Handlebar deformed (2.1.1b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp missing (1.3.3a)

Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Drive chain worn but not considered excessive (6.2.1e)

Rear shock absorber has a light misting (2.4.A.1c)

unable to test rear disc run out

Exhaust noisy (7.1.2)

Rear Tyre valve stem slightly damaged (4.1.2c)