2003 Piaggio ET2

Motorcycle structure is corroded but structural rigidity is not significantly reduced under foot plate (6.1.1 (c) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced under foot plate (6.1.1 (c) (i))

Steering head stock has play in the bearing

Centre Lower Motorcycle structure slightly corroded (6.1.1a)

Centre stand/pivot worn

Centre stand/pivot worn

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear shock absorber has a light misting (2.4.A.1c)

Steering headbearing has slight free play (2.2.2)

Offside Steering lock stop ineffective (2.1.3)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear position lamp adversely affected by the operation of another lamp (1.1.3b)

Rear shock absorber has a light misting (2.4.A.1c)

Steering headbearing has slight free play (2.2.2)

Riders seat insecure (6.2.1a)

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Oil leak

Headlamp aim too low (1.6)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Tyre tread not clearly visible (4.1.3(i)) DANGEROUS

Rear Tyre tread not clearly visible (4.1.3(i)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Exhaust is leaking and excessively noisey (7.1.1b)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)