2011 Yamaha Yzf

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Fairing Loose.

Front Brake binding but not excessively (1.2.1 (f))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Chain guard missing

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Rear Tyre side Walls Cracking.

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Fairing Loose.

Front Brake binding but not excessively (1.2.1 (f))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Chain guard missing

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Rear Tyre side Walls Cracking.

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Headlamp lens slightly defective insecure (4.1.1 (b) (i))

Nearside mirror missing

Offside Front position lamp not connected

Passenger seat(s) missing at time of test

Rear Nail in tyre

both tyres have signs of irregular wear

gear lever rubber heavily worn

pillion footrest not fitted at time of test

wiring hanging down from loom behind headlamp

Brake pedal anti-slip provision missing (1.1.2 (c))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Headlamp lens slightly defective insecure (4.1.1 (b) (i))

Nearside mirror missing

Offside Front position lamp not connected

Passenger seat(s) missing at time of test

Rear Nail in tyre

both tyres have signs of irregular wear

gear lever rubber heavily worn

pillion footrest not fitted at time of test

wiring hanging down from loom behind headlamp

Solo seat fitted at time of test, no pillion footrests

Wheel alignment slightly misaligned (2.4 (a))

Brake component inadequately mounted Front brake pipe (1.1.21 (c))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Solo seat fitted at time of test, no pillion footrests

Wheel alignment slightly misaligned (2.4 (a))

Solo seat fitted at time of test, no pillion footrests

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front suspension assembly component missing Fork bolt (2.3.1)

Solo seat fitted at time of test, no pillion footrests

Rear Rear mono-shock pivot worn but not excessive (2.4.B.4)

Offside Rear Roller brake test indicates a sticking brake (3.3.A1a)

Front Headlamp aim too high (1.6)

Rear Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear Rear reflector on motorcycle missing (1.4.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))