2013 Audi A4

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both inner facing suspension upper link arms bushes are perished. (5.3.4 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear facing arm Rear facing bush is perished. (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both inner facing suspension upper link arms bushes are perished. (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Headlamp cleaning device for LED or HID headlamp inoperative Both NS and OS. (4.1.6 (a) (ii))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Both rear shock absorbers leaking

Nearside Rear Tyre close to legal limit

n/s/r seat belt not fully inspected due to child seat fitted at time if test,

slight flat spots to both rear tyres on inner edges, tyre tread depths; both front 8.0mm, n/s/r 5.0mm, o/s/r 6.0mm, 1255/35/19 96y xl

Nearside Front Headlamp cleaning device for LED or HID headlamp inoperative (4.1.6 (a) (ii))

Offside Front Headlamp cleaning device for LED or HID headlamp inoperative (4.1.6 (a) (ii))

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

n/s/r seat belt not fully inspected due to child seat fitted at time if test,

slight flat spots to both rear tyres on inner edges, tyre tread depths; both front 8.0mm, n/s/r 5.0mm, o/s/r 6.0mm, 1255/35/19 96y xl

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

tread depths: n/s/f on 2mm, o/s/f on 2.5mm, both rear on 5mm.

tyre size: 255/35ZR 19 96Y XL.

tread depths: n/s/f on 5mm, o/s/f on 4mm, both rear on 5.5mm.

tyre size: 255/35 ZR 19 96Y XL.

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

tread depths: n/s/f on 5mm, o/s/f on 4mm, both rear on 5.5mm.

tyre size: 255/35 ZR 19 96Y XL.

Nearside Rear Tyre worn close to the legal limit 2mm worn on edges (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2mm worn on edges (4.1.E.1)

Offside Side repeater not working (1.4.A.2c)

Headlamp cleaning device inoperative (1.7.2)

Nearside Rear Tyre worn close to the legal limit 2mm worn on edges (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2mm worn on edges (4.1.E.1)