2001 Iveco Daily

Age related corrosion under vechicle

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material Both rear (1.1.11 (c))

Rear Service brake weak

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material Both rear. (1.1.11 (c))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

extensive welding repairs and corrosion to outer riggers,inner wheel arches,floors and closing sills.

offside front body mounting worn.

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material Both rear. (1.1.11 (c))

extensive welding repairs and corrosion to outer riggers,inner wheel arches,floors and closing sills.

offside front body mounting worn.

Rear Brake pipe corroded, covered in grease or other material Both rear. (1.1.11 (c))

Rear Handbrake effort just met and will need attention have advised presenter

Rear Rear service brake effort just met and will need attention have advised presenter

extensive welding repairs and corrosion to outer riggers,inner wheel arches,floors and closing sills

offside front body mounting worn.

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material Both rear. (1.1.11 (c))

extensive welding repairs and corrosion to outer riggers,inner wheel arches,floors and closing sills

offside front body mounting worn.

offside front body mounting worn

extensive welding repairs and corrosion to outer riggers,inner wheel arches,floors and closing sills

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component ball joint has slight play BOTH FRONT LOWER (5.3.4 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Service brake effort inadequate at a wheel both rear (1.2.1 (a) (i))

Suspension component ball joint has slight play BOTH FRONT LOWER (5.3.4 (a) (i))

extensive welding repairs and corrosion to outer riggers,inner wheel arches,floors and closing sills

offside front body mounting worn

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Nearside front inside wheel arch (6.2.2 (d) (i))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Nearside rear inner sill by leaf spring front bush mounting (6.2.2 (d) (i))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Nearside rear inside wheel arch (6.2.2 (d) (i))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Offside front inside wheel arch (6.2.2 (d) (i))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Offside rear inner sill corroded which was previously repaired (6.2.2 (d) (i))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Offside rear leaf spring bush mounting area corroded (6.2.2 (d) (i))

Nearside Rear reflector missing (4.8.2 (a) (ii))

Offside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Side repeater not working (4.4.1 (a) (ii))

Rear Service brake efficiency below requirements (1.2.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Brake pedal wearing smooth (1.1.2 (c))

Brake pipe corroded, covered in grease or other material Nearside rear by fuel tank (1.1.11 (c))

Corrosion under body and all suspension components

Front Brake pipe corroded, covered in grease or other material Both sides (1.1.11 (c))

Front and rear brake discs surface corroded

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside rear lamp lens cracked

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Perished (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Previous welding repaired

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Nearside Rear reflector missing (4.8.2 (a) (ii))

Offside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (i))

Brake pedal wearing smooth (1.1.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))

Front Suspension arm ball joint has slight play nearside and offside (5.3.4 (a) (i))

Front nearside and offside outer sill panel has corrosion

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement all four (5.3.4 (a) (i))

nearside and offside front wings lower part excessively corroded, offside front wing is insecure

nearside and offside headlamps affected by the operation of position lamps

nearside headlamp has slight play

nearside inner wheel arch has excessive corrosion

nearside rear outer sill panel has corrosion

offside inner wheel arch has corrosion

underbody has corrosion, some underbody panels heavily sealed

All position lamps not working Front and rear sidelights (1.1.A.3b)

Central Seat belt locking mechanism does not secure or release (5.2.5a)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Upper Suspension component mounting prescribed area is excessively corroded Shock absorber mount (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Battery insecure (1.9.1)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Nearside Rear Brake pipe excessively corroded pipes to the limiter valve corroded (3.6.B.2c)

Nearside Rear Braking system leaking (3.6.A.1)

Offside Front Headlamp aim too low (1.8)

Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded wing (3.6.C.3)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Offside Front Suspension arm corroded and seriously weakened (2.4.G.1)

Offside Rear fog lamp not working (1.3.2b)

Offside Upper Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake load sensing valve defective and function impaired (3.6.E.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Front Brake pedal spongy (3.3.B.1b) DANGEROUS

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak engine ()

Body has slight corrosion (6.1.B.2)

Brake pipe slightly corroded covered with grease unable to inspect fully (3.6.B.2c)

Front suspension has slight play in a lower suspension ball joint both (2.5.B.1a)

Front suspension has slight play in a upper suspension ball joint both (2.5.B.1a)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch area (6.1.B.2)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings riggers (6.1.B.2)

Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings riggers (6.1.B.2)

Offside Rear position lamp(s) not working (1.1.A.3b)

Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)

Registration plate lamp not working (1.1.C.1d)

Body has slight corrosion (6.1.B.2)

Brake pipe slightly corroded covered with grease unable to inspect fully (3.6.B.2c)

Front suspension has slight play in a lower suspension ball joint both (2.5.B.1a)

Front suspension has slight play in a upper suspension ball joint both (2.5.B.1a)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Rear Brake pad(s) wearing thin (3.5.1g)

Detachable tow ball assembly inappropriately repaired (6.6.7)

Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Rear Brake pad(s) wearing thin (3.5.1g)

Battery insecure (1.9.1)

Brake load sensing valve inoperative missing (3.6.E.3)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sil (6.1.B.2)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Braking system leaking (3.6.A.1)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Ball joint has excessive play top ball joint (2.2.B.1f)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

oil leek

Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Offside Rear position lamp(s) not working (1.1.A.3b)

Rear Brake pipe excessively corroded (3.6.B.2c)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Brake load sensing valve seized (3.6.E.3)

Front position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Brake pipe slightly corroded (3.6.B.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear Registration plate lamp not working (1.1.5c)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Registration plate lamp not working (1.1.5c)