2005 Buell XB12S

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit Outer pad worn thin (1.1.13 (a))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Suspension rod pin, bush or joint worn but not resulting in excessive movement Slight up and down play in shock bearing. (5.3.4 (a) (i))

Exhaust noisy aftermarket silencer fitted (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

front and rear brake fluid levels just above min marks

Rear Footrest missing n/s and o/s rear pegs missing (6.2.12 (a))

Exhaust noisy aftermarket silencer fitted (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

front and rear brake fluid levels just above min marks

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

belly pan broken, at the moment is secure

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front headlamp is rubbing on head stock

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

belly pan broken, at the moment is secure

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Wheel bearing has slight play Slightly rough when rotated (5.1.3 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Steering head bearings slightly stiff

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bearing has slight free play Up & down (2.4.A2a(i))

Horn not working (1.7.3a)

Bike presented for test without rear footrests fitted - not required,as fitted with single seat.

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear shock absorber has a light misting (2.4.A.1c)

Rear suspension bearing has slight free play (2.4.A2a(i))

Rear wheel bearings are slightly rough (2.4.A.2c)

Front mudguard insecure (2.3.7)

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Bike presented for test without rear footrests fitted - not required,as fitted with single seat.

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear shock absorber has a light misting (2.4.A.1c)

Rear suspension bearing has slight free play (2.4.A2a(i))

Rear wheel bearings are slightly rough (2.4.A.2c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bearing has slight free play (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1b)

Exhaust noisy (7.1.2)

Steering movement slightly 'notchy' (2.2.1b)

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))