MOT Status
ExpiredMileage
113,785 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Indicator switch inoperative (4.4.2 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting axle swivel pin mounting area holed (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting osr axle swivel pin mounting area (6.2.2 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Central Front Exhaust mounting defective (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material on axle (1.1.11 (c))
Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Outer Integral body structure is fractured but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Front Exhaust mounting defective (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear axle corroded
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Power steering malfunctioning (2.1.5 (a))
Emissions just met requirements
Front Exhaust mounting defective (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-lock braking system wiring damaged but not excessively fouling tyre left hand down (1.6 (d))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material to front pipe slightly corroded (1.1.11 (c))
Offside Front mirror glass cracked
Offside Front tyre wearing on inner shoulder
Offside Front wheel bearing noisy on road test
Offside Rear Brake pipe corroded, covered in grease or other material to front pipe slightly corroded (1.1.11 (c))
Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material to front pipe slightly corroded (1.1.11 (c))
Offside Front mirror glass cracked
Offside Front tyre wearing on inner shoulder
Offside Rear Brake pipe corroded, covered in grease or other material to front pipe slightly corroded (1.1.11 (c))
Nearside Front bottom suspension arm rear bush starting to deteriorate
Nearside Rear Brake pipe slightly corroded to front pipe (3.6.B.2c)
Offside Rear Brake pipe slightly corroded to front pipe (3.6.B.2c)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front bottom suspension arm rear bush starting to deteriorate
Nearside Front brake disc lipped
Nearside Rear Brake pipe slightly corroded to front pipe (3.6.B.2c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened and lipped (3.5.1i)
Offside Rear Brake pipe slightly corroded to front pipe (3.6.B.2c)
Brake pipe slightly corroded both front to rears (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
both front tyres worn on inside edges
Brake pipe slightly corroded front to rear brake pipes (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Brake pipe slightly corroded front to rear brake pipes (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
front discs worn and lipped
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KX56 XBV is a 2007 Peugeot 107 in Red with a 998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2007 Peugeot 107 models, the average MOT pass rate is 74.0% with a typical mileage of 56,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying KX56 XBV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 19 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KX56 XBV?
You can check the full history of KX56 XBV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KX56 XBV registered?
KX56 XBV is a 2007 Peugeot 107, first registered on 5 January 2007.
Is KX56 XBV safe to buy?
The MOT history for KX56 XBV shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KX56 XBV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KX56 XBV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.