2010 Ford Tourneo Connect

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL SECTION (6.2.2 (d) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL SECTION (6.2.2 (d) (i))

Spare wheel insecure in carrier WHEEL PLACED IN REAR OF VEHICLE NOT SECURED (6.1.5 (b) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

poor effort parking brake

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Reversing lamp inoperative (4.6.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Seat belt anchorage loose (7.1.1 (b))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Nearside outer sill with slight corrosion

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Fluid leak, but not excessive gearbox (8.4.1 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Parking brake: efficiency below requirements (3.7.B.7)