MOT Status
ValidMileage
97,293 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))
Main beam tell-tale not working (4.9.1 (a) (ii))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor pan marked in yellow (6.1.1 (c) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Central Exhaust mounting defective (6.1.2 (a))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Registration plate insecure but not likely to fall off (0.1 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
3rd brake light inoperative
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
3rd brake light inoperative
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))
Rear Tyre worn close to legal limit/worn on edge both n/s and o/s (5.2.3 (e))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
How Reliable is the Mitsubishi Lancer?
Based on 382,912 MOT tests across 33,260 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KX61 CNC is a 2011 Mitsubishi Lancer in Blue with a 1,998cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 82.4%.
Across all 2011 Mitsubishi Lancer models, the average MOT pass rate is 76.9% with a typical mileage of 66,316 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mitsubishi Lancer fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 9,095 recorded failures. If you're considering buying KX61 CNC, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Lancer typically stays on UK roads for around 30 years. At 15 years old, this Mitsubishi Lancer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KX61 CNC?
You can check the full history of KX61 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KX61 CNC registered?
KX61 CNC is a 2011 Mitsubishi Lancer, first registered on 1 September 2011.
Is KX61 CNC safe to buy?
The MOT history for KX61 CNC shows 17 tests with a 82.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KX61 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KX61 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.