2013 Peugeot 208

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

front brake discs heavily worn

front brake pads 3/4 worn

Front Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Nail in tyre

Oil leak, but not excessive Engine oil (8.4.1 (a) (i))

Rear Exhaust mounting defective Hanger snapped (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Exhaust mounting defective Rear exhaust silencer back box mount broken (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened Lipped (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2 mm tread (5.2.3 (e))

Offside Rear Nail in tyre

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Outer Tyre tread depth below requirements of 1.6mm Heavily worn on edge (5.2.3 (e)) DANGEROUS

Offside Rear Nail in tyre

Exhaust mounting defective Rear exhaust silencer back box mount broken (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened Lipped (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2 mm tread (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))