2010 Ford S-max

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

wishbone bushes perished-n/s/f shocker damp-rear axle corroded-

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Inner side light not working

Nearside Rear Suspension arm has slight play in a pin/bush front starting to split (2.4.G.2)

Offside Rear Inner edge deteriorated but not down to cord's

Offside Rear Suspension arm has slight play in a pin/bush front starting to split (2.4.G.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Suspension arm has slight play in a pin/bush front starting to split (2.4.G.2)

Offside Rear Inner side light's not working

Offside Rear Suspension arm has slight play in a pin/bush front starting to split (2.4.G.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Headlamp aim too high (1.8)

Rear Brake pad(s) wearing thin (3.5.1g)