2012 Mercedes-benz C

Bonnet release handle missing at the time of test but can still be operated

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm ball joint has slight play Rear most (5.3.4 (a) (i))

Offside Front Outer Tyre has a cut but not deep enough to reach the ply or cords Wall (5.2.3 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Bonnet release handle missing at the time of test but can still be operated

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm ball joint has slight play Rear most (5.3.4 (a) (i))

Offside Front Outer Tyre has a cut but not deep enough to reach the ply or cords Wall (5.2.3 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Bonnet release mechanism defective

Coolant leak ()

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated & seeping grease (5.3.4 (b) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated Becoming insecure (5.3.4 (b) (i))

Outer Tyre has a cut but not deep enough to reach the ply or cords Both Front & Nearside Rear sidewalls (5.2.3 (d) (i))

Rear Passenger seat(s) missing at time of test All ()

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Bonnet release mechanism defective

Chip on windscreen

Coolant leak ()

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated & seeping grease (5.3.4 (b) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated Becoming insecure (5.3.4 (b) (i))

Outer Tyre has a cut but not deep enough to reach the ply or cords Both Front & Nearside Rear sidewalls (5.2.3 (d) (i))

Rear Passenger seat(s) missing at time of test All ()

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Nearside Front Brake pad(s) wearing thin Very low (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin Very low (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Front Suspension arm pin or bush excessively worn track arm (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm pin or bush excessively worn track arm (5.3.4 (a) (i))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm both rear (4.1.E.2a)

both front tyres worn on edges

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

both front tyres worn on edges