2010 Mercedes-benz Vito

Direction indicator incorrect colour both rears (4.4.3 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Fuel system component leaking injector (6.1.3 (b) (i))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear floor areas (6.1.1 (c) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp insecure (4.1.1 (c))

Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Oil leaking excessively from engine (8.4.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Service brake excessively fluctuating fronts (1.2.1 (e))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Brake pipe corroded, covered in grease or other material front/rear (1.1.11 (c))

Nearside Rear outer sill corroded

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Tyre worn close to legal limit/worn on edge both fronts (5.2.3 (e))

rear chassis legs corroded

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Outer Integral body structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i))

Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

damage to front bumper/o/s/r lamp and panel

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Oil leaking excessively from engine (8.4.1 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

damage to front bumper/o/s/r lamp and panel

Brake lever has insufficient reserve travel (1.1.2 (a))

Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Oil leaking continuously from engine posing a serious risk to road safety (8.4.1 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Brake pipe corroded, covered in grease or other material main pipe at rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Brake pipe corroded, covered in grease or other material main pipe at rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Tyre tread depth below requirements of 1.6mm both rear (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust emits clearly visible black smoke during acceleration (8.2.1.2 (g))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Side repeater incorrect colour (4.4.3 (a))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Headlamp aim too high and too far to the right. (1.8)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)