2011 Yamaha YBR125

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

front mudguard missing

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

front mudguard missing

Dipswitch does not operate immediately when selected on dipped beam Tester believes headlamp fitted upside down (4.1.3 (b))

Dipswitch does not operate immediately when selected on main beam Tester believes headlamp fitted upside down (4.1.3 (b))

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp aim so that beam "kick up" is not visible on the screen No beam pattern, tester belives headlamp has been fitted upside down (4.1.2 (a))

Front Suspension component modified so the suspension is inoperative No movement in front suspension (5.3.3 (c) (ii)) DANGEROUS

Rear Tyre has ply or cord exposed Multiple cuts in tyre tread exposing cords (5.2.3 (d) (ii)) DANGEROUS

Brake fluid on minimum

Drive chain worn but not considered excessive In poor condition (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Gear selector insecure

Ignition switch intermittent fault

Play in main stand mounts

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Rear Brake indicates excessive fluctuation of brake effort brake pedal pulses under load (1.2.1 (e))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Horn not working (7.7 (a) (ii))

Exhaust noisy not standard (7.1.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Exhaust noisy not standard (7.1.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Headlamp aim beam image kick up to the offside (1.6)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)