1998 Mazda MX-5

Tyre worn close to legal limit/worn on edge all tyres worn on inner edge (5.2.3 (e))

most bushes deteriorated with age but no play

Driver's airbag missing (7.1.5 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Exhaust emissions - engine idle speed too high (8.2.1.2 (e))

Exhaust emissions likely to be affected by an exhaust leak turbo to down pipe (8.2.1.1 (b))

Nearside Front Position lamp lens seriously defective (4.2.1 (b))

Offside Front Position lamp lens seriously defective (4.2.1 (b))

Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill , floor pan (7.1.1 (a) (i))

Registration plate lamp likely to become detached both (4.7.1 (c) (ii))

Coolant leak ()

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Inner Suspension arm pin or bush worn but not resulting in excessive movement uppers and lowers O/S and N/S (5.3.4 (a) (i))

Registration plate lamp throwing direct white light to the rear both (4.7.1 (a))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Tyre slightly damaged/cracking or perishing worn slick on inside edge rubber damaged no cords showing (5.2.3 (d) (ii))

Windscreen wiper blade defective (3.4 (b) (i))

Emissions not tested (8.2.1.2 (d))

Horn not working (7.7 (a) (ii))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Position lamp missing (4.2.1 (a) (ii))

Nearside Headlamp missing (4.1.1 (a) (ii))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Offside Front Position lamp missing (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Front Registration plate lamp insecure (4.7.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Registration plate missing (0.1 (a))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

exhaust noisy

Direction indicator does not face the front (1.4.A.2b)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill (2.4.A.3)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Outer Suspension component mounting prescribed area is excessively corroded Sill (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside front brake excessively fluctuating (3.7.B.3)

Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Headlamp not working on main beam both (1.7.5a)

Main beam 'tell-tale' not working (1.7.4c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Brakes imbalanced across an axle (3.7.B.5b)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

both front brakes slightly binding

nearside rear brake pipe covered in grease/paint time of retest

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Brake pad(s) wearing thin (3.5.1g)

both front brakes slightly binding

Front Brake pad(s) wearing thin (3.5.1g)

n/s/f brake slightly binding

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Brake pad(s) wearing thin (3.5.1g)

n/s/f brake slightly binding

Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Headlamp aim too low (1.8)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)