1998 Renault Master

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Headlamp lens slightly defective both (4.1.1 (b) (i))

Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced both side inner (6.1.1 (c) (i))

Nearside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Nail in tyre ()

Rear Brake pipe corroded, covered in grease or other material all rear (1.1.11 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced jacking points (6.1.1 (c) (i))

incorrect exhaust mounts fitted

Incorrect exhaust mountings fitted

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Jacking point (6.1.1 (c) (i))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Jacking point (6.1.1 (c) (i))

Central Brake pipe corroded, covered in grease or other material Front to rear pipes (1.1.11 (c))

Central Exhaust mounting defective Rubber mounts (6.1.2 (a))

Nearside Front Brake hose has slight corrosion to ferrule Both hoses (1.1.12 (f) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake hose has slight corrosion to ferrule Both hoses (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Brake pipe corroded, covered in grease or other material Front to rear pipes (1.1.11 (c))

Central Exhaust mounting defective Rubber mounts (6.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Brake hose has slight corrosion to ferrule Both hoses (1.1.12 (f) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake hose has slight corrosion to ferrule Both hoses (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis cross member (5.3.6 (a) (i))

Nearside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis cross member (5.3.6 (a) (i))

Offside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Front Lower Suspension component mounting prescribed area is excessively corroded jacking point (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust system not adequately supported (7.1.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Side repeater not working (1.4.A.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust mountings in poor condition

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Exhaust mountings in poor condition

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint is insecure (2.5.C.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Emissions not tested (7.0)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

slight split on both wiper blades