1994 Fiat Hymer Motorhome

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced various areas (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced various areas (6.1.1 (c) (i))

Central Exhaust mounting defective (6.1.2 (a))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

corrosion starting various areas

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Central Exhaust mounting defective (6.1.2 (a))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

corrosion starting various areas

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive various (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced by all body fixings (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced body fixing (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced body fixing (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Oil leak ()

Central Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Side repeater not working (1.4.A.2c)

Oil leak ()

Oil leak ()

Offside Front Upper Brake pipe slightly corroded (3.6.B.2c)

oil leaks

Oil leak

Headlamp masks/converters fitted

Oil leak

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Side repeater not working (1.4.A.2c)

Oil leak

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Oil leak

Centre Brake pivot has restricted free movement (3.5.1k)

Front Headlamp aim too low (1.8)

Nearside Headlamp aim beam image kick up to the offside (1.8)

Offside Headlamp aim beam image kick up to the offside (1.8)

rear brake binding (3.7.B.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Oil leak

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Oil leak

Offside Track rod end ball joint has slight play (2.2.B.1f)

all exhaust o rings perishing

Centre Rear Brake pipe excessively corroded (3.6.B.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)