MOT Status
ExpiredMileage
14,813 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure (1.9.1)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill (6.1.B.2)
Nearside Front Brake pipe inadequately clipped (3.6.B.1)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inside wheel arch (6.1.B.2)
Nearside Rear Brake pipe inadequately supported (3.6.B.1)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill (6.1.B.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill (6.1.B.2)
Offside Front Brake pipe inadequately clipped (3.6.B.1)
Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inside wheel arch (6.1.B.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe inadequately clipped (3.6.B.1)
Offside Registration plate lamp not working (1.1.C.1d)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front coil spring broken (2.4.C.1a)
Parking brake lever has little reserve travel (3.1.6b)
Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim too low and too far to the right. (1.8)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Nearside front to rear brake pipe corroded, near fuel tank.
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Offside front to rear brake pipe corroded, near fuel tank.
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front coil spring incomplete (2.4.C.1a)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear registration plate deteriorated (6.3.1d)
rear brake application uneven (3.7.B.2)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Registration plate lamp not working (1.1.C.1d)
nearside front seatbelt slightly stiff on retraction
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
nearside front seatbelt slightly stiff on retraction
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Headlamp aim too far to the right (1.8)
Nearside Registration plate lamp not working (1.1.5c)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Registration plate lamp not working (1.1.5c)
Offside Rear Rear wheel bearing has slight play (2.6.2)
both cv gaitors cracking
front brake discs lipped
nearside front top shockabsorber top mounting has slight play
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Headlamp aim too low (1.6.D2)
Offside Front Headlamp aim too low (1.6.D2)
Offside Rear Rear wheel bearing has slight play (2.6.2)
both cv gaitors cracking
front brake discs lipped
nearside front top shockabsorber top mounting has slight play
How Reliable is the Subaru Vivio?
Based on 1,694 MOT tests across 273 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
L213 XDF is a 1993 Subaru Vivio in Yellow with a 658cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 47.4%.
Across all 1993 Subaru Vivio models, the average MOT pass rate is 65.0% with a typical mileage of 48,929 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Subaru Vivio fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 198 recorded failures. If you're considering buying L213 XDF, it's worth having these areas checked by a mechanic before committing.
The Subaru Vivio typically stays on UK roads for around 34 years. At 33 years old, this Subaru Vivio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of L213 XDF?
You can check the full history of L213 XDF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was L213 XDF registered?
L213 XDF is a 1993 Subaru Vivio, first registered on 1 August 1993.
Is L213 XDF safe to buy?
The MOT history for L213 XDF shows 19 tests with a 47.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does L213 XDF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on L213 XDF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.