MOT Status
ValidMileage
162,987 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
SURFACE CORROSION TO FRONT AND REAR SUSPENSION
Front Registration plate missing (0.1 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
SURFACE CORROSION TO FRONT AND REAR SUSPENSION
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Emissions unable to be completed (8.2.1.2 (d))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Wheel arch/wing damaged
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Brake pipe excessively corroded Front to rear (1.1.11 (c))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Brake pipe excessively corroded Front to rear (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Wheel arch/wing damaged
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust noisy (8.1.1 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Emissions not tested (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Exhaust mounting defective (6.1.2 (a))
Exhaust noisy (8.1.1 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
engine management light on
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust mounting defective (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
mil light on
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Rear Tyre fouling a part of the vehicle (5.2.3 (f))
Offside Rear Tyre fouling a part of the vehicle (5.2.3 (f))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust mounting defective (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
mil light on
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Clutch Worn
Nearside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Wiper Smearing
Offside Front Inner Steering Arm, Slight Play
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer Seal Area, Also Within 30cm Of Suspension Mounting Point. Prescribed Area. (6.1.1 (c) (i))
Clutch Worn
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Wiper Smearing
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Inner Steering Arm, Slight Play
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Seat belt not functioning as intended behind seat (7.1.2 (c))
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside headlamp deteriorated not affecting beam image
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit 2mm, and worn on inside shoulder (4.1.E.1)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit 3mm, and worn on inside shoulder (4.1.E.1)
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit 2mm, and worn on inside shoulder (4.1.E.1)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit 3mm, and worn on inside shoulder (4.1.E.1)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
near side rear tyre tread slightly uneven
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
o/s/f tyre worn down to wear bars.
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
both front inner brake pads look considerably worn.
o/s/r tyre cracking.
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
n/s/f tyre considerably worn on outer ege
How Reliable is the Honda Logo?
Based on 38,342 MOT tests across 2,392 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
L21 OGO is a 2000 Honda Logo in Silver with a 1,343cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 62.5%.
Across all 2000 Honda Logo models, the average MOT pass rate is 76.7% with a typical mileage of 58,903 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Logo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,492 recorded failures. If you're considering buying L21 OGO, it's worth having these areas checked by a mechanic before committing.
The Honda Logo typically stays on UK roads for around 26 years. At 26 years old, this Honda Logo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of L21 OGO?
You can check the full history of L21 OGO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was L21 OGO registered?
L21 OGO is a 2000 Honda Logo, first registered on 1 November 2000.
Is L21 OGO safe to buy?
The MOT history for L21 OGO shows 32 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does L21 OGO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on L21 OGO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.