1994 Yamaha XJ600

Front Shock absorber has a light misting of oil (5.3.2 (b))

Front shock absorber has light misting of stanchion (2.3.3)

Drive chain slightly loose (6.2.1d)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

evidence of temporary exhaust repair

Exhaust is leaking and excessively noisey (7.1.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp slightly affected by the operation of another lamp (1.1.3b)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Rear position lamp slightly affected by the operation of another lamp (1.1.3b)

Chain has tight spot

Forks slightly pitted which could cause short seal life

Front brake showing early signs of binding

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear brake slight increased travel but performance fine

Rear tyre is cracked but not showing ply

Drive chain excessively tight (6.2.1d)

Front Tyre has ply or cord exposed (4.1.2a(iii)

Forks slightly pitted which could cause short seal life

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear brake slight increased travel but performance fine

Rear tyre is cracked but not showing ply

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Direction indicator not working (1.5.1c)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Steering lock stop ineffective (2.1.3)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Hydraulic brake control creeps under load. (3.1.4a)

Rear Hydraulic brake control feels spongy (3.1.4a)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Inner Rear Lower Rear suspension bush has excessive free play (2.4.A2a(i))

Offside Rear Lower Footrest missing (6.2.1a)

Offside Rear Lower Roller brake test indicates a binding brake (3.3.A1a)

Rear Drive chain sprocket slightly worn (6.2.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Rear Footrest insecure (6.2.1a)

Offside Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Rear Footrest insecure (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Steering headbearing has excessive free play (2.2.2)

Rear Drive chain sprocket slightly worn (6.2.1e)