1993 Land Rover Defender

Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake fluid contaminated (1.8 (a))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting circular (6.2.2 (d) (i))

Offside Rear Brake disc contaminated axle oil (1.1.14 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower shocker mount (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Rear Prop shaft joint worn, but not excessively rear prop rear uj (6.1.7 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced surface corrosion on many component parts... vehicle dry and sludgy (6.1.1 (c) (i))

Front Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))

Nearside Front passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Brake hose damaged and likely to fail not sucure on axle (1.1.12 (a)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Brake pipe inadequately supported with flexible pipe (3.6.B.1)

Offside Front Brake pipe inadequately supported with flexible pipe (3.6.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Horn not working (1.6.2a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Torque/reaction arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear fog lamp not working (1.3.2b)

Exhaust system not adequately supported (7.1.1)

Nearside Front Drag link end ball joint has excessive play (2.2.B.1f)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Drag link end ball joint has slight play (2.2.B.1f)

Offside Front Power steering component(s) has slight seepage from a component (2.3.3b)

Offside Front Radius arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)