1993 Ford Mondeo

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Rear Upper Brake pipe excessively corroded (3.6.B.2c)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear brake application uneven (3.7.B.2)

Offside rear brakes release unevenly (3.7.B.4)

Front Brake pipe slightly corroded (3.6.B.2c)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Offside Headlamp aim too high (1.8)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

air bag light on

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

both front tyres on inner edges

feeeplay at steering wheel

front and rear metal brake pipes starting to rust

front indicator bulbs fading

headlights dim and patterns slightly reduced

rear anti roll bar bushes to body

rear brakes slightly uneven and offside rear foot brake slightly low

rear number plate

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Registration plate lamp not working (1.1.5c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

nearside + offside front tyres getting low on outer edges

surface corrosion to nearside + offside rear inner sills

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

nearside + offside front tyres getting low on outer edges

surface corrosion to nearside + offside rear inner sills

Nearside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

nearside + offside rear tyres starting too perish

Nearside Inner Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Inner Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)