1994 Land Rover Defender

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

battery box corrosion

chassis corrosion

drop arm ball joint cover split

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

battery box corrosion

chassis corrosion

drop arm ball joint cover split

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount corroded. (5.3.6 (a) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail (6.2.2 (d) (i))

Offside Front Inner Brake pad(s) contaminated Hub seal leaking. (1.1.13 (b))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail (6.2.2 (d) (i))

Prop shaft joint excessively worn Rear prop shaft rear UJ has play (6.1.7 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Battery insecure and likely to fall from carrier Battery box corroded (4.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear tie rod bush mounts insecure due to corrosion (5.3.6 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear tie rod bush mounts insecure due to corrosion (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger corroded (6.1.1 (c) (i))

Prop shaft joint excessively worn Rear prop rear UJ (6.1.7 (c) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear cross member corroded (6.1.1 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Battery insecure but not likely to fall from carrier battery box corrosion (4.13 (a) (i))

Nearside Front Front passenger door hinge deteriorated so the door cannot be readily opened or closed (6.2.3 (c) (i))

Offside Front Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger (6.2.2 (d) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier battery box corrosion (4.13 (a) (i))

Nearside Front Front passenger door hinge deteriorated so the door cannot be readily opened or closed (6.2.3 (c) (i))

Offside Front Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing tyre perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing tyre perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing tyre perishing (5.2.3 (d) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Rear track rod (2.1.3 (g) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing Tyre also stepped (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge Tyre on 2mm (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front hub seal leaking

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive gear box/transfer box leaking (8.4.1 (a) (i))

Rear Oil leak, but not excessive diff leak (8.4.1 (a) (i))

Nearside Rear Direction indicator incorrect colour showing white (4.4.3 (a))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Hydraulic brake calliper excessively corroded and likely to crack caliper seized (1.1.16 (d) (ii)) DANGEROUS

Offside Rear Hydraulic brake calliper excessively corroded and likely to crack caliper seized (1.1.16 (d) (ii)) DANGEROUS

Offside Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (3.6.C.3)

all tyres perishing

Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt steering drop arm (2.2.C.1c)

Offside Front Suspension component mounting prescribed area is excessively corroded shock absorber turret (2.4.A.3)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger in 3 places (6.1.B.2)

Rear Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt top axle mount (2.4.G.2)

Rear Suspension arm has excessive play in a ball joint top axle mount (2.4.G.2)

Offside Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (3.6.C.3)

all tyres perishing

Front prop shaft rear uj getting worn

Rear axle top joint bush getting worn

Rear rear uj getting worn

Rear shock bushes getting worn

all tyres starting to get perished

Brake pipe inadequately supported across rear axle (3.6.B.1)

Front prop shaft rear uj getting worn

Offside Front Braking system leaking on calliper (3.6.A.1)

Rear axle top joint bush getting worn

Rear rear uj getting worn

Rear shock bushes getting worn

all tyres starting to get perished

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Seat belt cut but webbing not significantly weakened (5.2.2a)

Nearside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Front Seat belt cut but webbing not significantly weakened (5.2.2a)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

rear uj has very slight wear

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Direction indicators not working (1.4.A.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt damaged but webbing not significantly weakened (5.2.2a)

Ball joint has excessive play (2.2.B.1f)

Nearside Front Brake pipe kinked (3.6.B.2b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Panhard rod attachment bracket/mounting insecure (2.4.G.1)

Offside Front Panhard rod has excessive play in a pin/bush (2.4.G.2)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Position lamp switch faulty (1.1.A.1)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)