MOT Status
ExpiredMileage
108,219 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
corrosion hole o/s/f inner arch
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
corrosion hole o/s/f inner arch
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
corrosion hole o/s/f inner arch
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Windscreen washer not working (3.5 (a))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
corrosion holes n/s and o/s front floor outside of prescribed areas
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
corrosion hole o/s/f floor outside of prescribed areas
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
corrosion hole o/s/f floor outside of prescribed areas
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
corrosion holes outside prescribed areas
tyres perished
Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/inner arch (5.3.6 (a) (i))
Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/inner arch (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i))
Rear Registration plate insecure (0.1 (a))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
corrosion holes outside prescribed areas
tyres perished
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
corrosion hole o/s/f outside prescribed areas
sills corroded
corrosion holes outside of prescribed areas
o/s/r tyre perished
Vehicle structure has slight corrosion (6.1.A.1)
Fuel system component leaking filler (7.2.3)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Vehicle structure has slight corrosion holed outside prescribed areas (6.1.A.1)
corrosion hole outside prescribed areas
o/s/f wheel bearing noisey
Nearside Front wheel bearing has excessive play (2.5.A.3c)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Seat belt retracting mechanism defective (5.2.5b)
corrosion hole outside prescribed areas
o/s/f wheel bearing noisey
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Body has slight corrosion (6.1.B.2)
Oil leak
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nail in nearside front tyre
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Front wheel bearing has excessive play (2.5.A.3c) DANGEROUS
Nail in nearside front tyre
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nail in nearside front tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
advise both rear tyres slightly perished
Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
advise nearside rear tyre slightly perished
nearside front tyre getting low
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
nearside front tyre getting low
Centre Exhaust has a major leak of exhaust gases (7.1.2)
How Reliable is the Kia Pride?
Based on 67,258 MOT tests across 11,368 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
L360 PAH is a 1993 Kia Pride in Green with a 1,324cc petrol engine. This vehicle has been through 30 MOT tests with a personal pass rate of 63.3%.
Across all 1993 Kia Pride models, the average MOT pass rate is 61.2% with a typical mileage of 70,164 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Kia Pride fails its MOT is brake pipe excessively corroded, accounting for 9,245 recorded failures. If you're considering buying L360 PAH, it's worth having these areas checked by a mechanic before committing.
The Kia Pride typically stays on UK roads for around 35 years. At 33 years old, this Kia Pride is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of L360 PAH?
You can check the full history of L360 PAH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was L360 PAH registered?
L360 PAH is a 1993 Kia Pride, first registered on 1 August 1993.
Is L360 PAH safe to buy?
The MOT history for L360 PAH shows 30 tests with a 63.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does L360 PAH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on L360 PAH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.