1994 Mercedes-benz 410 D

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)

Nearside Front Leaf spring slipper slightly worn (2.4.B.5)

Nearside Front Upper Vehicle structure has slight corrosion (6.1.A.1)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)

Offside Front Leaf spring slipper slightly worn (2.4.B.5)

Offside Front Upper Vehicle structure has slight corrosion (6.1.A.1)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Steering system has slight free play detected at steering wheel (2.2.A.1a)

front brake pipes undersealed

many welded repairs to vehicle all heavily undesealed

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Side repeater insecure (1.4.A.2b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

rear brake application uneven (3.7.B.2)

all doors and lower sections of vehicle have duct tape on them hampering inspection

both front leaf spring U blots corroded

front panel corroded

nearside front under bonnet inner flitch corroded

rear brake load sensing valve corroded

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

rear brake application uneven (3.7.B.2)

both outer sills taped to hide corrosion

near side front arch taped to hide corrosion

rear doors taped to hide corrosion

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear brake application uneven (3.7.B.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Outer Brake pipe excessively corroded (3.6.B.2c)

Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Body has slight corrosion (6.1.B.2)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)