1993 Mazda 323

All brake and fuel pipes are slightly corroded, but have been greased

All front and rear suspension components are corroded

All front and rear suspension rubber bushes are slightly deteriorated

General corrosion underside vehicle

Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

All brake and fuel pipes are slightly corroded, but have been greased

All front and rear suspension components are corroded

All front and rear suspension rubber bushes are slightly deteriorated

General corrosion underside vehicle

Oil leak, but not excessive (8.4.1 (a) (i))

All brake pipes are slightly corroded, but have been greased

All front and rear suspension components are slightly corroded

All front and rear suspension rubber bushes are slightly deteriorated

Front registration plate is badly damaged, but not likely to be misread

Fuel filler pipes are slightly corroded

Underside corrosion in places

All brake pipes are slightly corroded, but have been greased

All front and rear suspension components are slightly corroded

All front and rear suspension rubber bushes are slightly deteriorated

Front registration plate is badly damaged, but not likely to be misread

Fuel filler pipes are slightly corroded

Nearside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Underside corrosion in places

Brake pipe slightly corroded rear to nearside rear and both rear (3.6.B.2c)

Centre exhaust mounting close to body

Front Brake hose slightly deteriorated both (3.6.B.4d)

Rear Fuel Pipe/s corroded ()

coil spring corroded all (2.4.C.1b)

general under-body corrosion

Brake hose has slight corrosion to ferrules all (3.6.B.4e)

Front Brake hose slightly deteriorated both fronts under wheel archs (3.6.B.4d)

Front coil spring corroded both sides (2.4.C.1b)

corrosion under vehicle over components

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

emissions not tested bxhaust blowing

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

emissions not tested exhaust blowing

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Mechanical brake component has restricted free movement (3.5.1k)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front front brake binding (3.7.B.1)

Offside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened (2.4.C.1b)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

whole under boby surface corrosion

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Anti-roll bar linkage fractured (2.4.G.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

rear tyres perished

underside of vehicle rusty in various places

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

rear tyres perished

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear tyres side walls perished