2000 Subaru Impreza

Nearside Front Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))

Nearside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Offside Front Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Vehicle undersealed

Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))

Nearside Front Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))

Nearside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Offside Front Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))

Vehicle undersealed

under side of car covered in underseal

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

under side of car covered in underseal

Exhaust noisy (8.1.1 (a))

Front Windscreen wiper blade defective both (3.4 (b) (i))

Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Outer Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Outer Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement all (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front of (2.4.G.2)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Front Outer Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Outer Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement all (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement front of (2.4.G.2)

covers impede parts of the inspection

front windscreen is marked

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim too high (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

covers impede parts of the inspection

front windscreen is marked

Front tyres worn on edges

Outer sills covered with plastic

Both front tyres wearing on edges

Both outer sill's covered with body kit

Both outer sill's covered with body kit

Exhaust system rusty and poor condition

Brake fluid warning lamp illuminated (3.6.G.2)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside front brake binding (3.7.B.1)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Both outer sill's covered with body kit

Exhaust system rusty and poor condition

Both outer sill's covered with body kit

Exhaust system rusty and poor condition

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Vehicle structure has slight corrosion (6.1.A.1)

Both outer sill's covered with body kit

Exhaust system rusty and poor condition

Vehicle structure has slight corrosion (6.1.A.1)

can not check outer door sills trims fitted

heat cover around rear exhaust box rusting away

strong advice tyre wear on both front inner and outer walls very worn

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

can not check outer door sills trims fitted

heat cover around rear exhaust box rusting away

strong advice tyre wear on both front inner and outer walls very worn

All four tyres perished and cracking

Child seat fitted not allowing full inspection of adult belt

Clutch bitting point very high

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

All four tyres perished and cracking

Child seat fitted not allowing full inspection of adult belt

Clutch bitting point very high

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)