1993 Subaru Impreza

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Direction indicator incomplete (1.5.A1b)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Registration plate lamp not working (1.1.5c)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Sub-frame has slight play in a pin/bush (2.4.G.2)

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Fluid suspension unit totally deflated (2.4.D.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside front brake juddering severely (3.7.A.2b)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Headlamp aim too high (1.8)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Fluid suspension unit totally deflated (2.4.D.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside rear brake binding (3.7.B.1)

Centre Exhaust system not adequately supported (7.1.1)

Nearside Headlamp aim too high (1.8)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front suspension locking device missing (2.5.A.4)

Offside Headlamp aim too high (1.8)

Offside Windscreen wiper blade insecure (8.2.2)

Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)