2003 Seat Leon

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Rear Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Headlamp aim too low (1.8)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Headlamp aim too low (1.8)

Offside Rear coil spring broken (2.4.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Inner Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear rear brake recording little or no effort handbrake caliper lever sticking. Lever freed off and greased. (3.7.B.5a)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear rear brake recording little or no effort Caliper handbrake lever sticking. Lever freed off and greased (3.7.B.5a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Engine management light on

Items removed from driver's view prior to test

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

Nail in offside front tyre

Nail in offside rear tyre

Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly scored (3.5.1h)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Power steering pipe(s) or hose(s) leaking from a joint (2.3.3b)

Rear Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly scored (3.5.1h)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Lower Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Lower Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)