1994 Yamaha XJ600

Exhaust mounting deteriorated. (7.1.1.c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain fouling another component (6.2.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain excessively loose (6.2.1d)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain worn to excess (6.2.1e)

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain slightly loose (6.2.1d)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Motorcycle structure slightly corroded (6.1.1a)

Rear suspension component slightly corroded. (2.4.A.1a)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Drive chain slightly loose (6.2.1d)

Gear lever slightly insecure

Motorcycle structure slightly corroded (6.1.1a)

Nearside Rear Exhaust mounting deteriorated. (7.1.1.c)

Rear suspension component slightly corroded. (2.4.A.1a)

Centre Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Centre Rear Tyre worn close to the legal limit (4.1.3(ii))

Centre Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Centre Front Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Centre Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Centre Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Rear brake caliper is slightly binding, not enough to register on brake tester, but advise freeing off the caliper / pistons.

Centre Front Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Centre Front Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Stop lamp deteriorated and function impaired (1.3.3a)

Offside Rear Brake reaction bracket securing bolt(s) missing (3.2.A1j)