1994 Rover Mini

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Lower sill outer skin corroded both sides

Outer body has corrosion

Wheel bearing has slight play Fronts (5.1.3 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect LED bulb fitted (4.1.2 (c))

Nearside Front Headlamp light source and lamp not compatible LED bulb fitted (4.1.4 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect LED bulb fitted (4.1.2 (c))

Offside Front Headlamp light source and lamp not compatible LED bulb fitted (4.1.4 (c))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Valve stem seriously damaged All 4 (5.2.3 (j)) DANGEROUS

Lower sill outer skins corroded both sides

Outer body has corrosion

Wheel bearing has slight play Fronts (5.1.3 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

body has corrosion

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Tyre not fitted in accordance with side wall instructions wrong way round (5.2.3 (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

body has corrosion

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

body has corrosion

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch inoperative (4.5.3 (a) (ii))

Corrosion by front and rear sub frame mounts

Front sub frame mounting bushes worn

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Corrosion by front and rear sub frame mounts

Front sub frame mounting bushes worn

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Corrosion by front and rear sub frame mounts

Front sub frame mounting bushes worn

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Sub-frame mount (6.1.1 (c) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear. (1.1.11 (c))

Offside Front Tyre perishing inner side wall

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Sub-frame mount (6.1.1 (c) (i))

Emissions not tested readings to far out of limits (8.2.1.2 (d))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Service brake lagging in operation (1.2.1 (d))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor-pan (6.1.1 (c) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Body panel corroded and likely to cause injury headlight area (6.2.1 (a) (i))

Offside Rear Brake pipe excessively corroded Front to Rear (1.1.11 (c))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Windscreen washer not working Both (3.5 (a))

Windscreen wiper not working Both (3.4 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Sub-frame mount (6.1.1 (c) (i))

Offside Front Tyre perishing inner side wall

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Sub-frame mount (6.1.1 (c) (i))

Rear registration plate faded but not likely to be misread (6.3.1d)

both front sub-frame rubber mountings deteriorated but not resulting in excessive movement

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front registration plate insecure (6.3.1b)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear registration plate faded but not likely to be misread (6.3.1d)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Stop lamp not working (1.2.1b)

Drivers side wiper clears screen poorly.

Engine cooling fan mount broken.

Engine or gearbox have slight oil leak.

Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension arm ball joint dust cover missing (2.4.G.2)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust sits close to body

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension joint offside upper dust cover split/missing

Washers poor

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

n/s/r tyre wearing on outer edge

unable to check hidden brake pipes

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Corrosion around front jacking points

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Oil leak

Temporary repair made to N/S/F brake back plate

An item not tested (Manual)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Corrosion around front jacking points

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Oil leak

Temporary repair made to N/S/F brake back plate

Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Oil leak

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

n/s/f floor pan corroded

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Upper Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Upper Suspension component mounting prescribed area is fractured (2.4.A.3)

Offside Front Upper Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Brake servo vacuum pipe lightly rubbing (3.6.C.1b)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tie bar/rod slightly distorted (2.4.G.1)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Tie bar/rod slightly distorted (2.4.G.1)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)