1993 Land Rover Defender

Nearside Drag link end ball joint has slight play (2.1.3 (b) (i))

Central Rear Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Fuel system component leaking injector pump? (6.1.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Fluid leak harmful to the environment or a risk to other road users Diesel leak from pump area (8.4.1 (a) (i))

Offside Rear Fuel cap/sealing device missing (6.1.3 (b) (i))

Nearside Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Front Brake disc contaminated (1.1.14 (b))

Nearside Front Oil leaking excessively from transmission (8.4.1 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Offside Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Headlamp aim too low Done PRS (4.1.2 (a))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Pennard rod mounting to axe. Area (5.3.6 (a) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Speedometer cannot be illuminated (7.8 (c) (ii))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Coil spring Incorrectly mounted.

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Suspension component mounting prescribed area is corroded but not considered excessive full chassis (5.3.6 (a) (i))

Nearside Front Suspension arm attachment bracket/mounting corroded and seriously weakened axle (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened axle (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive nsf hub seal (8.4.1 (a) (i))

Oil leak, but not excessive osf hub seal (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

body corroded

front suspension components corroded

rear suspension components corroded

under side of vehicle under coated/ treated

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened Inner disc surface corroded but not affecting performance (3.5.1i)

Offside Front Oil leak Outer Hub seal leaking but not affecting brake performance at time of test

Vehicle structure has slight corrosion Chassis has surface corrosion but metal gauge appears to be good at time of test (6.1.B.2)

all underbody components corroded

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Oil leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings panel (6.1.B.2)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Oil leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

all underbody components corroded

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Vehicle structure has slight corrosion (6.1.B.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Vehicle structure has slight corrosion (6.1.B.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Oil leak

Vehicle structure has slight corrosion (6.1.A.1)

os front ns front hub oil seals leaking

Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Vehicle structure has slight corrosion (6.1.A.1)

slight oil leak on front hub oil seals

Oil leak

Vehicle structure has slight corrosion (6.1.A.1)

o s f and n s f hub oil sealsleaking

Brake hose slightly deteriorated (3.6.B.4d)

Brake pipe slightly corroded (3.6.B.2c)

Vehicle structure has slight corrosion (6.1.A.1)

vehicle undersealed

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)