MOT Status
ExpiredMileage
156,214 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush worn (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened n/s/and o/s (1.1.14 (a) (ii))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Low effort from rear but overall effort met. (1.2.1 (c))
Rear subframe and all rear suspension components corroded
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))
Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush worn (5.3.4 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened n/s/and o/s (1.1.14 (a) (ii))
Rear subframe and all rear suspension components corroded
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded within 30cm of inner seat belt mount (7.1.1 (a) (i))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed and corroded within 30cm of rear suspension arm (5.3.6 (a) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Anti-roll bar has slight play in a pin/bush NSR and OSR (2.4.G.2)
Brake pad(s) wearing thin Front and rear (3.5.1g)
Brake pipes coated with rustproofing
Fuel pipes corroded
Oil leak
Brake pipe excessively corroded NSR and OSR (3.6.B.2c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Exhaust has a major leak of exhaust gases Centre and rear holed (7.1.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill holed (5.2.6)
Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill holed (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded Drivers door area (upper seatbelt mount area holed, behind rubber seal) (5.2.6)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Registration plate lamp not fitted NS and OS missing??? (1.1.C.1b)
Service brake: efficiency below requirements (3.7.B.7)
Anti-roll bar has slight play in a pin/bush NSR and OSR (2.4.G.2)
Brake pad(s) wearing thin Front and rear (3.5.1g)
Brake pipes coated with rustproofing
Fuel pipes corroded
Oil leak
NSR and OSR antirollbar bushes worn
Oil leak
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Suspension component mounting prescribed area is excessively corroded OUTER SILL HOLED (2.4.A.3)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear brake caliper has restricted free movement (3.5.1k)
Offside Suspension component mounting prescribed area is excessively corroded OUTER SILL HOLED (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
NSR and OSR antirollbar bushes worn
Oil leak
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Thrust bearing noisy
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too high (1.8)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp insecure (1.1.C.1c)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Thrust bearing noisy
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Thrust bearing noisy
Centre Brake pipe slightly corroded (3.6.B.2c)
Clutch thrust bearing noisy
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Rear rear brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Centre Brake pipe slightly corroded (3.6.B.2c)
Clutch thrust bearing noisy
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Headlamp aim too high (1.8)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
advise rear brake discs heavily corroded
Emissions not tested (7.0)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Inner Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
advise rear brake discs heavily corroded
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Stop lamp not working (1.2.1b)
Nearside rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Mazda MX-6?
Based on 27,122 MOT tests across 3,604 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
L742 LWE is a 1993 Mazda MX-6 in White with a 2,497cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 1993 Mazda MX-6 models, the average MOT pass rate is 63.4% with a typical mileage of 112,404 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-6 fails its MOT is parking brake: efficiency below requirements, accounting for 1,744 recorded failures. If you're considering buying L742 LWE, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-6 typically stays on UK roads for around 34 years. At 33 years old, this Mazda MX-6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of L742 LWE?
You can check the full history of L742 LWE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was L742 LWE registered?
L742 LWE is a 1993 Mazda MX-6, first registered on 1 August 1993.
Is L742 LWE safe to buy?
The MOT history for L742 LWE shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does L742 LWE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on L742 LWE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.