1993 Rover Mini

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Brake pad(s) insecure (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Suspension arm attachment bracket/mounting insecure (2.4.G.1)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust engine idle speed too high (7.3.D.1)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp adversely affected by the operation of another lamp (1.7.5c)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Intermediate drop arm insecure (2.2.B.1a)

Nearside Rear Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Body has slight corrosion (6.1.B.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

excessive grease around all ball joint covers

n/s and o/s soft, but not fractured

radiator fan detached from its mountings

rear boot floor soft, but not fractured

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Vehicle structure has slight corrosion (6.1.A.1)

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Oil leak

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

brake pipes covered in grease and underseal

front discs corroded

Offside Front Seat belt anchorage prescribed area is inadequately repaired (5.2.6)

Offside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Vehicle structure has slight corrosion (6.1.A.1)

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Oil leak

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

brake pipes covered in grease and underseal

front discs corroded

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Side repeater not working (1.4.A.2c)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Oil leak

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

b/pipes and under floor heavily undersealed

front b/discs corroded

n/s/r b/pipe rubbing on h/brake cable

rear sub-frame heavily undersealed

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front brake disc slightly pitted (3.5.1h)

Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Rear Rear fog lamp missing (1.3.2a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Upper Axle swivel joint has excessive play (2.5.A.3b)

Offside Rear Lower Axle swivel joint has excessive play in a ball joint (2.5.A.3b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)