1993 Rover Mini

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Emissions unable to be completed EXHAUST (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

headlamp deflectors fitted

Brake pedal anti-slip provision missing (1.1.2 (c))

Headlamp aim projected beam image is obviously incorrect x 2 (4.1.2 (c))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pedal anti-slip provision missing (3.3.A.1b)

Direction indicators not working (1.4.A.2c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Exhaust engine idle speed too high (7.3.D.1)

Headlamp aim too high (1.8)

Nearside Front Lower Ball joint has excessive play (2.2.B.1f)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Rear fog lamp not working (1.3.2b)

Stop lamp not working (1.2.1b)

Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc slightly pitted (3.5.1h)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp not working on main beam (1.7.5a)

Offside Side repeater not working (1.4.A.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc slightly pitted (3.5.1h)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear fog lamp not working (1.3.2b)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Fuel cap/sealing device sealing washer missing (7.2.4c)

Nearside Headlamp aim beam image kick up to the offside (1.6.B1)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Fuel cap/sealing device sealing washer missing (7.2.4c)

Offside Headlamp aim beam image kick up to the offside (1.6.B1)

Offside Stop lamp not working (1.2.1b)