1994 Nissan Micra

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill/floor holed (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension spring mounting prescribed area is excessively corroded floor/inner sill holed (2.4.A.3)

Offside Rear Brake pipe excessively corroded lsv to axle flexi pipe (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/floor holed (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear Exhaust has a major leak of exhaust gases silencer joint (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front crossmember corroded and holed outside prescribed area for engine mounting

Nearside Rear Brake pipe slightly corroded lsv to axle flexi pipe (3.6.B.2c)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pipe slightly corroded (3.6.B.2c)

Items removed from driver's view prior to test

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

all floors chassis outer sills and lower wishbones in poor condition

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Items removed from driver's view prior to test

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

all floors chassis outer sills and lower wishbones in poor condition

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear brake juddering slightly (3.7.A.5b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear brake juddering slightly (3.7.A.5b)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc slightly pitted (3.5.1h)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Registration plate lamp not working (1.1.5c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc slightly pitted (3.5.1h)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.5c)