1994 Rover Mini

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Front Upper Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Front Upper Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Front Nail in tyre

Front valance corroded

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front valance corroded

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

OSF Valance bush insecure

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front wheel bearing has slight play (2.5.A.3c)

Rear Sub frame is corroding.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front wheel bearing has slight play (2.5.A.3c)

Rear Sub frame is corroding.

Horn not working (1.6.2a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Parking brake lever has no reserve travel (3.1.6b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

front pads riding over disc

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

front pads riding over disc

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Registration plate lamp not working (1.1.5c)

Offside Steering rack gaiter split (2.2.D.2d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp insecure (1.7.3)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

corosion offside front inner wheel arch

Centre Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Headlamp aim too far to the left (1.8)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim too far to the left (1.8)

Offside rear brake binding (3.7.B.1)

Nearside Direction indicators not working (1.4.A.2c)

Nearside Front Direction indicators not working (1.4.A.2c)

Nearside Front Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear Direction indicators not working (1.4.A.2c)

Nearside Rear Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Direction indicators not working (1.4.A.2c)

Offside Front Direction indicators not working (1.4.A.2c)

Offside Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Offside Rear Direction indicators not working (1.4.A.2c)

Offside Rear Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)