1993 Fiat Ducato

Front brake disc surfaces corroded

Headlamp deflectors fitted

N/s/f tyre 10 ply all the other are 8 ply

O/s/f inner wing lip has been cut

O/s/f low brake pad sensor wire broken

Rear suspension leaf spring bushes worn

Slight engine oil leak

Slight play in all the wheel bearings

There is a block of wood fitted to the clutch pedal

Tow bar electric socket has been removed from its mounting to fit a bike rack

Various stickers in the windscreen but not in the wiper swept area

Exhaust has a major leak of exhaust gases Tail pipe missing (7.1.2)

Front brake disc surfaces corroded

Headlamp deflectors fitted

N/s/f tyre 10 ply all the other are 8 ply

O/s/f inner wing lip has been cut

O/s/f low brake pad sensor wire broken

Rear suspension leaf spring bushes worn

Slight engine oil leak

Slight play in all the wheel bearings

There is a block of wood fitted to the clutch pedal

Tow bar electric socket has been removed from its mounting to fit a bike rack

Various stickers in the windscreen but not in the wiper swept area

Windscreen wiper does not clear the windscreen effectively Both (8.2.2)

Deflectors are fitted on the headlamp lenses but the n/s still has kick up to the n/s

One of the exhaust mountings are split

The exhaust tail pipe is corroded and holed but underneath the vehicle not far from the end

The front brake discs are corroded but perform o.k.

The front brake pad sensor wires are broken

The n/s/f tyre is 10 ply all the others are 8 ply

The rear bumper towbar bracket are corroded

The rear suspension leaf spring eyelet bushes are worn

The towbar electrics socket has been removed from its mounting as a bike rack is fitted

There is a block of wood on the clutch pedal

There is a slight engine oil leak

There is slight play in all the wheel bearings

There is various slight underbody and component corrosion inc the front suspension strut legs

There is various stickers in the windscreen and side windows but not in the wiper sweep

the o/s/f inner wing lip has been slightly cut and bent

Brake load sensing valve defective and function impaired (3.6.E.3)

Deflectors are fitted on the headlamp lenses but the n/s still has kick up to the n/s

One of the exhaust mountings are split

The exhaust tail pipe is corroded and holed but underneath the vehicle not far from the end

The front brake discs are corroded but perform o.k.

The front brake pad sensor wires are broken

The n/s/f tyre is 10 ply all the others are 8 ply

The rear bumper towbar bracket are corroded

The rear suspension leaf spring eyelet bushes are worn

The towbar electrics socket has been removed from its mounting as a bike rack is fitted

There is a block of wood on the clutch pedal

There is a slight engine oil leak

There is slight play in all the wheel bearings

There is various slight underbody and component corrosion inc the front suspension strut legs

There is various stickers in the windscreen and side windows but not in the wiper sweep

the o/s/f inner wing lip has been slightly cut and bent

all the wheel bearings have slight play

both front brake pad low warning sensor wires have broken

both front seats have bolts missing from the rear of their mounting plates but seat belts are not incorporated

both headlamps are dirty inside and have image deflectors fitted

both o/s tyre tread depths are 5mm, the n/s/f is 4mm and the n/s/r is 3mm (min limit is 1.6mm)

the clutch pedal has a wooden block fitted

the exhaust is corroded but not leaking and the tail pipe is under the vehicle but jagged

the front brake discs are corroded but perform o.k.

the rear suspension leaf spring rear eye bushes are worn

the towbar electrics socket is insecure and taped up but the towball is not fitted

there is slight play in the steering rack and front strut legs

there is various underbody and component corrosion including the ferrules on the flexi brake hoses and towbar frame but all has been waxoyled

Brake load sensing valve seized (3.6.E.3)

Horn not working (1.6.2a)

all the wheel bearings have slight play

both front brake pad low warning sensor wires have broken

both front seats have bolts missing from the rear of their mounting plates but seat belts are not incorporated

both headlamps are dirty inside and have image deflectors fitted

both o/s tyre tread depths are 5mm, the n/s/f is 4mm and the n/s/r is 3mm (min limit is 1.6mm)

the clutch pedal has a wooden block fitted

the exhaust is corroded but not leaking and the tail pipe is under the vehicle but jagged

the front brake discs are corroded but perform o.k.

the n/s dip beam headlamp was not working at first but was working when the aim was checked

the rear suspension leaf spring rear eye bushes are worn

the towbar electrics socket is insecure and taped up but the towball is not fitted

there is slight play in the steering rack and front strut legs

there is various underbody and component corrosion including the ferrules on the flexi brake hoses and towbar frame but all has been waxoyled

engine slightly smokey.

exhaust system corroded,small hole in the tail pipe.

front brake disc surfaces corroded.

o/s/f upper marker light not working.

front brake disc surfaces corroded.

n/s/r tyre worn to 4 mm. Legal limit 1.6 mm.

o/s side flap lock not securing correctly.

slight play in all the wheel bearings.

slight play in the n/s/f steering rack knuckle joint.

both registration plates faded.

front brake discs slightly corroded,but perform OK.

the clutch pedal pad is made from wood.

the front brake pads sensor wires are broken.

there is slight play in all the wheel bearings.

various slight leak from the engine.

Brake load sensing valve seized (3.6.E.3)

Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)

Brake pipe excessively corroded (3.6.B.2c)

Exhaust system not adequately supported (7.1.1)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim beam image kick up to the offside (1.8)

Nearside Rear Leaf spring eye defective (anchor) (2.4.B.1b)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Headlamp aim too low (1.8)

Offside Rear Leaf spring eye defective (anchor) (2.4.B.1b)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

both registration plates are faded

the clutch pedal pad is made from wood

the front brake discs are slightly corroded but perfoprm o.k.

the front brake pad sensor wires are broken

there are various slight leaks from the engine compartment

there is slight play in all the wheel bearings

there is various slight underbody and component corrosion

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear rear brake binding (3.7.B.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake pedal creeps down when held under pressure (3.3.B.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp does not operate immediately when selected on dipped beam (1.7.4a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front position lamp(s) not working (1.1.A.3b)

Offside Front Brake pipe leaking (3.6.A.1) DANGEROUS

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

slight corrosion on all metal brake pipes

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)