1993 Honda CG125

Handlebar deformed but serviceable (2.2.1 (c) (i))

Lower chain guard missing

Nearside mirror missing

Nearside mirror missing

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Side stand missing

Nearside mirror missing

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Side stand missing

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Lower Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Down tube (6.1.1 (c) (i))

Nearside Steering operation fouling on the fuel tank or bodywork on full lock Lock stop worn (2.1.4 (b))

Rear Brake component insecure Brake torque arm, front fastener insecure (1.1.21 (c))

Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Swing arm, lower, front (6.1.1 (c) (i))

Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Swing arm, top, front (6.1.1 (c) (i))

Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Offside Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front mudguard lightly rubbing on tyre - lower

Front Wheel has a slightly distorted bead rim. (4.2.2)

Handel bar alignmemt out

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Direction indicator not working (1.5.1c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Handel bar alignmemt out

Centre Lower Motorcycle structure excessively damaged (6.1.1a)

Drive chain worn to excess (6.2.1e)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Front Front wheel bearings have excessive free play (2.3.5b)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Brake lever pivots slightly worn (3.1.3a)

Brake pedal pivots slightly worn (3.1.3a)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front wheel bearings are excessively rough (2.3.5b)

Rear Direction indicator insecure (1.5.3b)

Rear Registration plate insecure (6.3.1b)

Rear position lamp insecure (1.1.1c)

Stop lamp insecure (1.3.3b)

Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Brake lever pivots slightly worn (3.1.3a)

Brake pedal pivots slightly worn (3.1.3a)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Centre Rear Exhaust slightly deteriorated (7.1.1a)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Centre Rear Exhaust slightly deteriorated (7.1.1a)

Drive chain slightly tight (6.2.1d)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Front shock absorber has light misting of stanchion (2.3.3)

Front Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))